$ 950.00. Save $ 0
Units Sold: 81
If you are looking for a comprehensive solution to all your mobile signal boosting needs, our Tri-Band repeaters are the best bet. These models will boost signal at 850 MHz, 1800 MHz, and 2100 MHz and are available at amazing prices. The Big Band Plus does this job very well, and you would love the cool design of this mobile booster.
A full kit coming with the purchase allows you to have the setup done within 15 minutes, and if there are any issues, we are here to help you 24/7. Our latest technologies used in the repeater allow you to be perfectly safe and have no negative impact in any case. Since it covers most of the bands used in New Zealand, it is a perfect fit for most of your needs. Set it up and within seconds, you will have the 5-bar signal, whatever be your carrier or signal band. You are in for a treat.
How to select the best location is described fully in The installation guide. However, if you still cannot find a good place, you can contact us through chat or by email and we will help you with the setup.
Yes! The standard antenna can accept signal from within 170 degrees. If towers are located on the opposite side of your property than your antenna, you may need to upgrade your system by adding a second antenna so you can receive signal from all locations.
We sell high-quality products which are all capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. We have provided a list of devices and their support limit converted to dBs below:
Estimations can also be made using this table:
|Coverage in square metres||Number of supported users|
|Up to 150 sq m||Up to 50 users|
|Up to 300 sq m||Up to 100 users|
|Up to 600 sq m||Up to 150 users|
|Up to 1500 sq m||Up to 200 users|
The simplest way to test if your place is suitable for a mobile booster is to check the signal bars on your phone on the outside of your property.
Be aware for 1-2 bars is highly recommended that you upgrade to a more powerful antenna than that provided in the standard kit. You can do this by choosing the upgrade option (Yagi) in the product page.